|
TX-2188 (I) setting adhesive is a two-component (A/B) acrylate
copolymer lotion adhesive, which is mainly suitable for forming cylindrical or
spherical solids with powdered activated carbon. The A/B components undergo
cross-linking reactions with unique functional groups, and after
solidification, they exhibit excellent water resistance, acid resistance, and
alkali resistance, thereby improving the service life of adsorbent particles in
acid and alkali systems, saving costs, and improving efficiency.
1，Main
technical indicators:
(1) Appearance: Component A - milky white
viscous liquid; Component B - dark brown
viscous liquid.
(2) Solid content: Component A (S=29 ± 1%);
B component (S=99 ± 1%).
(3) PH value: Component A (5.0~7.0).
(4) Viscosity: Component A (35000-4500mpa.s)/250C;
Component B (200-400mpa.s)/250C.
2，Applicability: Widely used for
powder activated carbon molding in cylindrical or spherical solids.
3，Characteristics:
(1) After the A/B component is cured in
proportion (100: 10-20%), it has good fastness and pressure resistance,
extending the reusable time of the adsorbent material particles.
(2) Has good water resistance, acid
resistance, and alkali resistance, improving the service life of adsorption
materials.
(3) The resin formed after the A/B
components are cured in proportion is a non-toxic material.
4，Applicable methods and
precautions:
(1) Mix component A: B=100:10-20% evenly,
and add a certain proportion of water according to actual needs and stir
evenly.
(2) Mix powdered solids such as activated
carbon in a certain proportion with the above (A/B) mixed adhesive and an
appropriate amount of water in a mixer
Uniformly combine, then granulate (columnar
or spherical), dry at 130 ° C/3 hours to form, and let it dry naturally for 24
hours.
(3) Before using the glue, mix component A
evenly, add component B while stirring, and then add an appropriate amount of
water until uniform. This mixed adhesive has a shelf life of 1-2 hours, which
means it must be used up within the shelf life, otherwise it cannot be used
after curing.
(4) After using components A and B, the
remaining adhesive must be sealed properly (especially component B is prone to
curing and is scrapped).
(5) Do not mix with other adhesives to
avoid affecting the quality and effectiveness of the adhesive.
(6) This product should be stored in a dry
and cool place, with a suitable storage and use temperature of 5-30 ° C,
avoiding direct sunlight.
5，Packaging
specifications: TX-2188 (I) A/50 Kg, TX-2188 (I) B/25Kg, 200Kg plastic drum.
Transport ordinary goods.
Note: The technical information of this product is based on theory and years
of experience of our company, but does not serve as a guarantee of
responsibility. Customers should first request the product and choose to use it
themselves. If there are any difficulties in production, you can contact our
technical department, and our company will fully cooperate to meet the
customer's requirements.
|
User
login
